Category Archives: Watch and Jewelry

Reasons Precious White Gold is Turning Yellow

Gold has been one of the most valued metals since time immemorial. In its pure form, gold is yellow and very soft. As one of the most common and popular use of gold is in the form of jewelry, it has to be made hard by adding other metals. In short, alloys of gold are used to make jewelry, though some people prefer the pure form. The purity of gold is measured in carats, and 24 carat gold is considered the purest. When other metals are added in different quantities, the purity level decreases to 22 (22 parts gold and 2 parts alloy), 18, and 14 carats.

Throughout the centuries, people loved to wear yellow gold only. So yellow gold alloys were used for making jewelry. The metals used for this purpose are copper and silver. While silver can make the gold greenish in color, copper can make it look more reddish. So, usually, a mix of copper and silver in the ratio of 50:50, is added to gold, so that the yellow color is retained. These metals, when added to gold, do not cause any noticeable color change. However, some people experimented with other metals to produce gold alloys in colors, like white, rose, gray, green, and black.

What is White Gold?

As mentioned above, gold alloys were initially meant for making gold more pliable, in order to produce fine jewelry. This was done by adding metals, like silver and copper, so that the traditional yellow color of gold is not altered. White gold alloys are made by mixing at least one white metal to gold. The commonly used white metals are silver, palladium, nickel, and zinc. White gold was introduced in the 1920s, as a replacement for platinum, which was very expensive and popular. Platinum supply became scarce at that time, and white gold was introduced. Since its inception, such gold jewelry became very popular and replaced platinum to some extent.

So, it is the proportion of the metals in the alloys, that changes the color of gold. The atomic structure of the gold alloy is different from that of pure gold. This atomic structure affects the reflectivity of light of different wavelengths, thereby changing the yellow color of gold to white. However, the original color of white gold may have light grayish or yellowish hue. So, white gold is given a rhodium plating, in order to obtain that white hue. It is rhodium, that gives that bright look and the reflective feature to white gold.

While nickel is one of the most popular metals used for making white gold, it can cause skin rash in people with sensitive skin. So, nickel is not considered healthy. It is also said that nickel has carcinogenic properties. So, palladium, platinum, and silver are mostly used for making white gold. However, people often complain of white gold turning yellow. How does it happen?

Why Does White Gold Turn Yellow

Now, we know that most of the white gold jewelry comes with a rhodium plating, which gives the white hue and reflective nature. Most people mistake these properties as that of white gold. Beneath the rhodium plating, lies the white gold alloy, which can be gray or yellowish gray. So, once the rhodium plating wears out, the color of the white gold alloy can be seen. This is the reason behind white gold turning yellow. So, with regular use, the rhodium plating in white gold jewelry wears out, exposing the inner alloy, which is not ‘white’. Sometimes, yellow gold jewelry is plated with rhodium, and is sold as white gold. In such cases too, you may experience such color change. In short, white gold is not a metal in itself, as pure gold is yellow in color. White gold is actually gold alloys (mixed with white metals), that have the typical ‘white’ color due to the rhodium plating. As the plating fades with time, the inner alloy is exposed, and this is the reason for white gold turning yellow.

Essentially, the quality of rhodium plating is more important. Cheap ones can wear out soon, as compared to a good quality plating. Proper handling is also important, as rough usage can affect the plating. So, buy white gold from authentic and trusted jewelers, and handle it with care.

Methods of Cleaning Tarnished Gold Jewelry

Before we understand how to clean gold, we have to learn the reasons why it gets tarnished in the first place. Gold is inert in nature and does not react with other elements easily. Therefore, there is no chance of pure gold getting tarnished. However, as gold in its purest form (24 carats) is very soft, it is combined with other metals like silver and copper to make it durable. These elements react with atmospheric oxygen, moisture, etc. and end up tarnishing the piece. There are other substances like sweat, natural skin oils, skin care products, makeup, perfumes, etc. which come into contact with gold and discolor it. You must have noticed that the pieces of jewelry made from 18 carat gold do not get tarnished. Jewelry made using 9 to 14 carat gold is more susceptible to tarnishing.

How to Clean Tarnished Gold

Gold is a precious metal. You cannot afford to use the wrong cleaning techniques and cause damage to it. Therefore, do exercise caution while you restore the natural shine of the yellow metal.

Method #1
You can clean your jewelry with the help of mild dish washing liquid and warm water. Prepare a soapy solution by mixing up one quart of liquid soap in one bowl of warm water. Soak the jewelry in this solution for about 5 minutes. Then rub the surface of the jewelry gently with your fingers. If the dirt is stubborn, then you can use a soft bristled brush to scrub it thoroughly. Once all the dirt and debris is removed, rinse it off with warm water. Wipe off excess water with a soft cotton cloth. Then let it air dry for the next 24 hours and place it into the jewelry box. Here, I would like to mention that do not use any kind of harsh or abrasive cleaning agents or a stiff brush for cleaning. As gold is soft, these materials can leave scratches on the piece.

Method #2
Alternatively, you can use a more aggressive method of cleaning with the help of ultrasonic machines. You can purchase a machine for cleaning up tarnished gold jewelry at home. These machines release ultrasonic sound waves for removal of dirt and debris from gold. You have to first pour some cleansing liquid into the machine. Use a mixture of liquid dish washing soap and 95% ammonia for this purpose. Place the jewelry into the machine and switch it on. The ultrasonic sound waves radiated from the machine will break down the dirt present on the jewelry piece and make it clean and shiny without any scratches.

If none of the remedies prove helpful, you ought to seek professional help. Jewelers are more experienced, and they can rightly suggest how to clean gold jewelry which is in a bad condition. If there are some scratches, then it may require polishing with special abrasive papers available with jewelers.

You can prevent any further tarnishing by taking proper care of gold jewelry. Gold jewelry must be stored in protected jewelry box to prevent exposure to dust. Keep each piece of jewelry in separate cases so that they do not scratch each other.

How to Sell Your Gold Jewelry

There are very few people whose eyes don’t light up at the sight of gold. The shiny metal has been the most coveted object on Earth, since ancient times. A lot of people may advise you that the best investment in recession is gold and silver. Stock prices may fall and investment in any other security may not work for you, but gold investment always works. Even though gold prices do fluctuate, they have always been on the positive growth curve and many people who have put their faith and money in gold, have been rewarded handsomely.

A word of caution before we move ahead. Beware of scam artists who put up websites and pose as gold buyers. They promise you a higher-than-market price and dupe you in the end. If you must make an online transaction, then make sure that you do so, only after you have verified the authenticity of the website.

Selling it For Cash

Selling jewelry is a transaction that you must carry out carefully, if you expect to expect to get paid, according to the current market prices. The three questions that should pop up in your mind are – How to evaluate purity of the jewelry? How and where can you sell it? Let me answer all these questions, in that order.

Evaluate Purity
Firstly, test and evaluate the purity of your gold. The price you get is a function of its purity. Gold purity is measure in carats. 24 carat is the purest form of gold. Any value in carats, less than 24, means that your jewelry contains other metals mixed in. The carat value is engraved on it nowadays. Using a magnifying glass, if you carefully observe the surface of the jewelry piece, you will find that the value is engraved on it. If it is an antique or heirloom piece, you will need to get its purity evaluated by a jewelry store. You can take help from the National Association of Jewelry Appraisers, to evaluate it.

Check Out Latest Gold Prices
After you know what is the purity value of the gold in carat, you must check out what are the current prices of the metal in the bullion market. Calculate the per gram value, from the market quoted value, and then get the price of your jewelry evaluated according to its carat value. Jewelry stores can do that for you.

Find a Good Seller
The best place to sell is to make the transaction at a certified jewelry store. Another option is to sell it to a gold scrap dealer. The second option is the least recommended as you will get a better price at a jewelry store. Other option is to sell the piece of gold in an auction if it’s an heirloom piece of great value. Selling gold in an auction can fetch a much higher price for it, than market value, if it is a really old and rare antique piece. You could sell the gold online, but remember that this remains the least secure of all options.

As I said before, make sure that you check the authenticity of the buyer, before going for a sale. Rather than going for online sales, I would personally suggest that you go and sell your jewelry in person and handle the whole transaction on your own. Make sure that you get the purity evaluated before you go in for an actual sale. Ensure that you are paid according to the quality of the jewelry in carats and according to the current market prices. Don’t settle for anything less than what you are entitled to.

Hypoallergenic Jewelry

Picture this! You have had a fabulous day. First a small party in the office and then at home. You got all the chances to flaunt your new jewelry. It was a day well spent with good fun and much-needed relaxation. The next day when you wake up, you see that you have an ugly rash around your neck. This rash may be because of the nickel present in the necklace you wore.

Instances of a rash on wearing such jewelry are increasing. Instead of treating the rash with possible remedies, it is better to prefer precaution. By this, I mean, it is better to use hypoallergenic jewelry―a type of jewelry that is made specially for people who have a sensitive skin. Let’s read on in more detail.

What is Hypoallergenic Jewelry?

Basically, this type of jewelry is made sans the use of harmful alloys, nickel to be precise. It could be any other metal as well. Even if someone is allergic to a particular metal, this jewelry is the best bet. This type of jewelry is made of titanium, gold (10 to 14 karat), surgical steel, and sometimes, also niobium. The best part about niobium and titanium is that they never have a reaction with the chemical makeup of your skin. These metals are thus used as a coating. Platinum, too, is used to create such jewelry. In addition to this, pure copper (free from nickel) or nickel alloys are used. Jewelry that does not contain metal, and is made by using beads and threads is also said to be hypoallergenic.

Benefits of Using Hypoallergenic Jewelry

The best part about this type of jewelry is that you will not wake up with an ugly skin rash the next day. This jewelry is safe for prolonged wear; there would still not be any reaction. Sometimes, people develop tendencies of an allergy later on in life. Using hypoallergenic jewelry will ensure that you never have to deal with a rash, even in the future. Since this jewelry is made from a wide variety of metals, it does not compromise on quality of design.

General Precautions

  • Be it normal or hypoallergenic, avoid wearing jewelry at home. This will ensure that your skin is rarely exposed to metals.
  • Apply a clear nail polish to the area which is going to be exposed to jewelry. This is when you know you’re sensitive to a particular piece of jewelry but have to wear it for some important reason.
  • As far as possible, do not go for cheap or oxidized jewelry.
  • While buying hypoallergenic jewelry, make sure it is marked accordingly, and that you are getting an authentic deal.

It is very important to take precautions while choosing jewelry, specially if you have a sensitive skin. But with the hypoallergenic type, you can rest assured that you’re skin is exposed to only the safest of materials.

Tribal Jewelry for Men

Wearing jewelry is not only done for the sake of fashion, but also to reflect culture, wealth, character, and belief. Tribal jewelry originated in Africa and excavation studies revealed that they existed before 10,000 B.C. Such form of jewelry also evolved from the ancient Egyptians and the Harappa and Mohenjo-daro civilization. The male folk of those age-old times adorned their body parts with jewelry having peculiar structures made from animal or plant parts. Apart from those, amulets were also worn by them that was believed to bring good fortune, wealth, and health. The purpose of wearing jewelry was also connected with keeping themselves away from evil spirits. Today people wear them merely as a fashion statement.

If you observe the attire of tribal men, then you will find them decked up with a plenty of jewelry. They opt for anklets, wristbands, bangles, earrings, headbands, and many other uniquely designed jewelry. Making such patterns of jewelry is indeed a praiseworthy art and you can get them from stores or buy them online.

Silver Tribal Jewelry
Silver accessories are mainly worn as a single piece, bracelet, earrings, or neck pieces. The silver is usually left unpolished to retain the crude look. The highly finished silver body jewelry are not only fashionable but are also expensive. Faces of different Gods are molded on pendants, while bangles are carved with designs of animal heads, skeletons, etc.

Copper Tribal Jewelry
Copper jewelry are purely antique and are adorned as head sticks and bands. These are mixed with bronze, and are used for making rings in different shapes and styles. Captive rings, circular barbells, earlets, eyelets, bent barbells look stunning in copper. Labret studs are more often adopted by men who have pierced their labret. Thick anklets made from copper reflect the true form of tribal jewelry. The head sticks have arrow like structures that can be held on the side of the ear and appear to be raised from the top of the head.

Iron Tribal Jewelry
These are heavy and extremely masculine. Only those who can well carry it off well should opt for it. Iron casing necklaces and bangles reveal a savage way of thinking, and are mostly worn by the tribals of West African and Middle Eastern countries. Also much common among the Bedouins, Banjaras, and Turkomans, the jewelry pieces are blended with stainless steel creating a contemporary look. They are mainly worn as anklets, toe rings, thumb rings, bangles, and neck pieces.

Organic Tribal Jewelry
If you wanna deck up as a real tribal man, then opt for the organic forms. Ornaments are made from plants, wood, animal parts, shells, bamboo, and amber. The mineral stones like agate, amethyst, quartz, onyx, obsidian, etc are used for making septum, labret, ear plugs, earrings, rings, etc. Jewelry made from bones and horns are mostly used as head pieces.

Dressing up like a tribal is not the criterion for wearing such jewelry. You can easily mix and match a piece with your outfit. Select the pieces that you can carry well, as they will be symbolic of your character and perspective.

How To Clean Jewelry

Necklaces, bracelets, earrings, rings, etc., enhance one’s beauty and charm. Though everybody likes jewelry, it is mostly the females who adore it the most. However, a time comes when your enchanting piece may lose its earlier shine! After wearing it for a few days, a bright and shining piece may lose its charm and glitter. Do you want to know why this happens? This is due to dust, dirt, and the body lotions that we use. Jewelers often advise us to clean jewelry carefully on a regular basis. A good cleaning can turn a dull piece into an eye-catching one.


Before cleaning, you should make sure of certain things, such as the stones should be fitted properly. Make sure that mounting and all the clasps, prongs, etc., that fasten the piece together are tight enough to clean. If you are not sure about how to clean your delicate piece, it is important to talk with your jeweler before using any homemade cleaning solution on it. Now, the question that comes to our mind is how to clean it? To answer this, let us tell you that there are various ways of doing so.

Cleaning Silver

  • Silver earrings, finger rings, or necklaces should always be cleaned with soft cotton or flannel cloth.
  • A silver cleaning cloth may help in quick cleaning of your silver jewelry, as it has anti-tarnish ingredients.
  • A smooth toothbrush can be used to clean the intricate scroll work.
  • A mixture of small amount of liquid detergent or soap in warm water can also be used to clean dirt.
  • Rinse the piece in warm water, wipe with a cloth, and allow it to dry.
  • If you have used a toothbrush, then scrub gently and rinse it.
  • Use a silver dip (liquid cleaner) or baking soda paste to remove tarnish.

However, it is better to avoid using silver dip in cleaning gemstones, as the stones may get damaged due to chemical reactions.

Cleaning Gold

  • To clean gold necklaces, finger rings, bracelets studded with beautiful stones- soak the piece for 10 to 15 minutes in hot soapy water.
  • Now, scrub with a soft-bristled toothbrush, rinse it in lukewarm water, and allow it to dry.
  • Add a few drops of ammonia into the soapy water to remove the tarnish.
  • In addition to this, dirt can be removed from your gold piece by dipping it into alcohol.
  • In case of cleaning white gold, ultrasonic cleaning can be used, under the assistance of a jeweler.

Cleaning Diamonds
Every girl wants to own at least one piece of diamond jewelry. Like any other type, diamonds too may lose their shine after frequent wearing. To bring the sparkle back, you should know how to clean the pieces. Here are some tips:

  • Soak your diamond earring, necklace, etc., in a solution of warm water and ammonia or mild detergent.
  • Now scrub gently with a smooth toothbrush.
  • A toothpick may help you to get hard-to-reach areas.
  • Allow it to dry on a clean cloth or tissue paper.

While cleaning your diamond jewelry, don’t use any homemade chlorine bleach as it may damage the charm and dazzle of the piece.

Cleaning Pearls

  • To clean pearls, use a soft and clean cloth and wet it in soapy water.
  • Now rub the piece with this dampened cloth.
  • Rinse it gently and allow it to dry.
  • Do not soak your pearls in soapy water, as it may cause it to stretch.
  • Pearl jewelry should be worn after cosmetics and perfumes are applied.
  • It is advisable not to use abrasive or other alcoholic mixtures while cleaning it, as alcohol may damage it.

These tips may help you regain the shine of your jewelry. For better results or professional cleaning, you may approach a professional to polish your necklace or bracelet.

Ultrasonic Jewelry Cleaner

The simplest way to clean jewelry in today’s date is to make use of an ultrasonic jewelry cleaner. Ultrasound technology has come with the most sophisticated, accurate and least harmful method of micro cleaning a whole range of items. An ultrasonic jewelry cleaner can be defined as a device that is run electronically and designed to take away dirt and grime from rings, necklaces, earrings and other pieces of jewelry. These devices can be easily found on homes shopping channels or on the internet. You can also go out shopping next time and one if these. The device is really easy to use and it can serve the purpose within five minutes to seven minutes without much manual effort like scrubbing or polishing or even the use of harsh chemicals.

Ultrasonic Jewelry Cleaner: Parts and Function

The basic ultrasonic jewelry cleaner unit makes use of water and gentle ultrasonic waves to remove dirt and dust from delicate items like rings, eyeglasses, bracelets, necklaces and the like which are risky to clean with any other hands. The cleaners that are available in the market lately are really easy to use. One just needs to place the jewelry in the cleaning chamber of the ultrasonic cleaner which has to be then filled with water, then the cover ahs to be closed, and then it has to be turned on. Within the time of three to five minutes, the jewelry you put in comes out as sparkling and new.

The device has two parts which help it to function the way it does. They are:

  • A small motor
  • A cleaning tank

Some of the Ultrasonic Jewelry cleaners also have a basket or a cleaning tray that is detachable from the main device. There is not much that is required for an Ultrasonic device; it can be plugged into the simple and standard plug points. It does not require a lot of electricity as well which we are all a little apprehensive about when we buy any electronic equipment.

Ultrasonic Jewelry Cleaner: How to use it?

The process of using of the Ultrasonic Cleaner is fairly simple. If you are using it for the first time, do care to read the manual once, which will enlighten you on the basics of the operation system of the device.

  • Once you want to start the process of cleaning, fill some warm water in the cleaning tank or a cleaning solution, if you have qualms about using water. The cleaning solution can be of any constitution; it can contain non-ionic surfactants, detergents or even ammonia except for bleach and acids as cleaning agents.
  • Now switch on the so that the cleaning solution can warm up a bit. After around five to ten minutes put the jewelry you intend to clean in the cleaning tray.
  • After some time (as the specific timeframe stated in the manual) you can switch the device off, open the lid and douse the jewelry in the mixture twice or thrice and again put it as it was and switch the device on to complete the cycle of cleaning.
  • Once done take the jewelry out of the cleaner, and clean it under running water, if required otherwise just dry them with a clean cloth and lo! Your jewelry is new again.

Ultrasonic Jewelry Cleaner: Technology

When the device is switched on, the motor of the device produces ultrasonic energy, which is transmitted with vibrating waves. It is estimated that on an average, an ultrasonic jewelry cleaner emits a minimum of forty thousand sound waves every second. There is a process called Cavitation in which microbubbles are created as a result of the vibrating motion of the ultrasonic waves. There are so many bubble created that each of then actually knocks against each other and to the items kept in the cleaning tray, thereby reaching to even the little crevices of the pieces of jewelry. So this is the process by which an Ultrasonic Jewelry Cleaner cleans your jewelry so effectively. This process does not harm your jewelry at all and it is very safe for jewelry as expensive as platinum but it should not be used for opals, pearls, emeralds and other soft stones.

Antique Jewelry

download-15The title of Paul Scott’s novel, The Jewel in the Crown, set in the period of the British rule in India, was derived from an allegorical painting depicting Queen Victoria, sitting regally on the throne of India, and receiving the Kohinoor, which was considered the largest diamond in the world once, as homage, representing India itself. The diamond was later set into Queen Elizabeth’s crown, and is still part of the British crown jewel, which is worn on formal occasions.

Jewelry has been a favorite form of adornment since time immemorial. There is evidence, for instance, of the skill the Greeks and Etruscans displayed in the precious metals they worked on. In fact, most of the modern jewelry that is created today still copy the designs of such antique works. The Romans also displayed a great fondness for it and wore it freely, as did the Victorians.

The pieces of vintage jewelry that are available these days are timeless classics that never go out of fashion. With their delicate grace and ethereal charm, they remind us of a bygone era. Jewelry is considered antique if it has been made in the 1900s or before. Imbued with unique character, displaying exquisite craftsmanship, and often surrounded by a whimsical aura, antique jewelry stands out from its modern counterparts, irrespective of how expensive or beautiful they may be. In fact, it is prized mostly for the classic understated elegance that is inherent in their styling and design.

For instance, the turn of the century – from 1890 to 1910 -, was an era of great innovation and change. After about 65 years of the reign of Queen Victoria, even the Victorians, who loved tradition, were ready for new things, and in the realm of jewelry, this pursuit for novelty gave rise to two extremely beautiful and very different schools of design – Art Nouveau and Edwardian.

Art Nouveau, for example, explored the world of fantasy and nature. The top jewelers of that time – Karl Faberge, Georges Fouquet, Rene Lalique, and Louis Comfort Tiffany – designed exceptionally beautiful and original pieces inspired by mythological and natural themes. The common motifs were mythical beasts, dragonflies, exotic flowers, and enchanted damsels set amongst sinuously winding, vine-like creepers.

These jewelers also tried out new materials, like gems. Horn, tortoise shell, demantoid garnets, moonstones, baroque pearls, and marvelous enameling, were included in the palette of the Art Nouveau jewelers. The intrinsic value of the materials did not matter, rather the emphasis was on the beauty and the originality of the jewelry they created.

While the avant-garde favored the style of Art Nouveau, Edwardian pieces were a reflection of the elegant and refined tastes of the moneyed American industrialists and English aristocracy. Edwardian style is characterized by cool elegance and airy lightness.

Their favorite metal was platinum, which they crafted into lacy delicate creations, set with brilliantly cut, sparkling diamonds. Some of these pieces also have colored gemstones, like black opals from Australia, pastel blue sapphires from Montana, as well as natural pearls. In the best of Edwardian pieces, these beautiful gemstones seem to float in a lacy firmament of platinum.

From Edwardian brooches with flowing leaves and tendrils of platinum set with diamonds, elegant Victorian gold bracelets, intricately crafted sword handles, enamel encrusted belt buckles and pendants, to engraved art deco lockets, designed with concentric rings of white and blue enamel… this cannot be bought off the counter from just any jewelry shop or departmental store. It is usually available at exclusive boutiques, antique dealer’s stores, big auction houses, and niche show rooms, which, in fact are the reliable sources to buy antique pieces.

Although this jewelry is also available in other shops and on websites, it is best to exercise caution when buying from these sources, because the originality of the pieces may be suspect. Besides, you could end up paying an exorbitant price for a piece of that may not be worth that much. Unless you are knowledgeable and have a trained eye, it can be difficult to sort out the authentic from the fake.

Usually, antique jewelry is also passed down from one generation to the next, and belongs to family heirlooms. Many pieces are collector’s items and hence are quite expensive.

Wearing a simple piece has the ability of lending a sophisticated appeal to your whole persona. One of the best aspects of antique pieces is the appreciation of their value over time, hence they can actually turn out to be good investments. However, the main reason to own a piece of this jewelry, is the intrinsic joy that they are imbued with.

The word ‘jewel’, means joy. Jewelry has no practical reason for its creation, except for the beauty and joy that it brings into our lives. Precious metals and gemstones are not jewelry until the skillful hands of the jeweler puts life into them.

Anklets for Women

Women all over the world are crazy for jewelry; not only do they love it, but they also want to have a huge collection of all types of it, right from nose pins to toe rings. All pieces of jewelry have a unique decorum and purpose. Necklaces, finger rings, and nose pins are among those ornamental pieces that get noticed and complemented easily.

But there is an amazing ornament that may not be easy to notice, but when it does, it completely arrests the attention of the viewer. This piece of jewelry is worn around the ankles, and is known as an anklet. They highlight a woman’s legs and increase their beauty. The women who wear or have worn anklets at some point in their life simply describe anklets as things that define femininity.

Some Interesting Facts

★ As has been mentioned above, anklets are chain-like or bracelet-like ornaments that are worn around the ankle. They are also known by a variety of other names such as paayal, jhanjhar, pazeb, etc.

★ The trend of wearing anklets finds its origin in Egypt, Arabian countries, and India. They can be made of gold, silver, and even with some less-expensive metals such as bronze, and materials like leather, nylon, plastic, etc.

★ In India, anklets are very important for women and are generally worn by them during marriages. Indian women wear anklets on both legs. However, in other parts of the world, majority of women prefer to wear an anklet on one leg only.

★ In the northern parts of India, you will find silver anklets for women to be very popular. As you go down and reach the southern regions, you will get to see ones made from gold as more popular.

★ Anklets can be flexible as well as inflexible. The former type are made by linking small units in order to form a chain. It may or may not be attached with a sonorous bell. The purpose of the sonorous bell is to make a pleasant sound while the wearer walks. The latter type, or inflexible anklets are formed by giving shape to a flat metal sheet.

Making Them at Home

Wearing anklets and highlighting the legs is a rage among women. There are many young and old women who have never worn anklets in their lives but are now looking forward to give it a shot. If you are such a person, then you might be doubtful about how your legs look with the anklets. If you wish to see how your leg will look like when you put an anklet on it, here is a cheap yet effective way out. Make one at home and put it on to see yourself and judge whether it suits you or not.

★ Collect some decorative beads. You may get those from an old necklace or bracelet.

★ Take a measuring tape and measure the circumference of your ankle. Increase the distance by about 3 centimeters.

★ Take a nylon thread and cut it out at a length equal to what you derived in the previous step. Insert one end into the hole of a needle. Join both the ends and form a knot.

★ Insert the beads through the needle to form a chain. Take out the needle. Put the chain around your ankle and tie a knot at the point where the two ends meet.

★ The knot will hold the chain in place. This chain solves the purpose of an anklet.

So? Are you convinced with how it looks? Now all you need to do is start stocking up on these pretty pieces of jewelry and start stunning those who look at you! Happy dazzling!

Creative Jewelry Display Ideas

Is your jewelry placed in a practical, but boring jewelry box? Or is it that you don’t wear them, just ’cause it’ll take all the time in this world to find the one that goes on your attire? We know that the jewelry display stands available in stores, or online are a great deal to buy. With these clever jewelry storage ideas, you can let your rocks sparkle like true decorative objects!

With our tips, the simple wooden boxes would get transformed into real treasure chests, and small hooks and branches would become sparkling displays. Even a mere umbrella could do the trick for you!

Bangles and Bracelets
Have you hung your bangles on a belt hanger in your wardrobe, but they were a bit hard to get to? Or is it that your bangles are jumbled together in a drawer? You wanted to organize them, but couldn’t think of how. We have creative suggestions for you.

Are you not wearing your jewelry because it’s not displayed? The idle bottles will solve that problem! A simple bottle can make bracelets and watches so attractive to see, yet organized!

Your bangles have a decorative task and not just on your wrist. Because the beautiful and colorful pieces can decorate vases too.

Earrings, Rings, and Broaches

Some DIY jewelry storage ideas can be so simple, yet elegant. All you have to do is take a pillow or cushion, and pin your earrings and broaches on it. Or if you have a lovely pair of stilettos that you don’t wear often, it can be used as a display.

It doesn’t rain all the year, does it? What do you do with the idle or worn-off umbrellas? Yes, it’s our next “making the best from waste” idea.


A tailor’s bust can transform your room into a designer’s studio.

Any antiques that you have at your home, like those wooden tree branches, can be transformed into a jewelry tree.

Practically any household object can be turned into a work of jewelry art, like a hanger or cheese grater. If you have a wooden hanger, small silver hooks (found at hardware stores) can be attached to hang necklaces from. If you have an unused cake stand or ceramic bowls at home, you can place your necklaces in it.

You also get those decorative jewelry boxes now. But in case you’re interested in making your own, just get any wooden box that has sufficient drawers or shelves to fit your jewelry, and decorate them with glitter laces or sparklers.

Other Display Options

Want all the accessories in one place? You can simply place your gems in the shelves, or it can be racks too as shown in the image below.

If you have an additional closet, just tuck in your accouterments.
Ideas for a Jewelry Store

The Classic Version!

Jewelry stores can make the use of neck busts and mannequins beautifully, for presenting jewelry. Silk scarfs, artificial flowers, etc., can be added to enhance the view.

The Customized Version!

Stores can also dedicate separate sections for each jewel, like using different hand mannequins for displaying bracelets, and those for displaying rings.

Well, if you ask us, we would go for an all-rounder like this:

Storing your accessories doesn’t have to be only functional, it can be fashionable too! We hope that you liked these innovative ways to pomp your jewelry.